1. When choosing the location of the suspension point, the best air circulation position should be considered first, followed by the direction of the warehouse structure.
2. The gap between the air cooler and the storage plate should be greater than the thickness of the air cooler.
3. All suspension bolts of the air cooler should be tightened and sealed with sealant to prevent cold bridging and air leakage.
4. When the ceiling fan is too heavy, a 4-angle or 5-angle iron should be used as a beam, which should span over another top plate and wall panel to reduce the load.
Installation Technology Of Cold Storage Doors
Jun 09, 2024
Leave a message
